Setlist Management

The Song Bank

The Song Bank is the master library of all songs you've configured. Every song you create lives here and can be added to any setlist.

Creating a Song

1. Open the Cuelist Editor
2. Click + Add Song in the Song Bank
3. Enter a song name (max 24 characters)
4. Add sections and MIDI messages

Song Structure

Each song contains one or more sections. Sections represent distinct moments in a song where your MIDI configuration changes.

Common section naming:

• VERSE / CHORUS / BRIDGE / SOLO
• INTRO / VERSE / LEAD / OUTRO
• CLEAN / CRUNCH / LEAD

Section names are uppercase and limited to 13 characters.

Adding MIDI Messages to a Section

For each section, add any combination of Program Change and Control Change messages:

1. Click + Add Message within a section
2. Select message type: PC or CC
3. Set the number (0–127) and channel (OMNI or 1–16)
4. For CC messages, also set the value (0–127)

Building Setlists

A setlist is an ordered list of songs drawn from your song bank.

Creating a Setlist

Click the + button in the setlist sidebar to add a new setlist. You can create up to 10 setlists (S01..S10).

Adding Songs to a Setlist

Drag songs from the Song Bank into the active setlist, or use the + button next to each song in the bank.

Songs in the setlist can be reordered by dragging.

Using Setlists Live

The pedal always runs the active setlist. To switch setlists, sync a different one from the editor before the show — syncing will reboot the pedal and temporarily disconnect the editor.

Controls during performance:

• Single footswitch (tap) — advance one section (default linear behavior)
• Single footswitch (fast double-tap) — go back one section (undo safety)
• Single footswitch (long press) — skip the current song

All of the footswitch behaviors are also available on the touchscreen: swipe up/down to move within a song's sections and swipe left/right to change songs.

Syncing to Pedal

When your setlist is ready, click Sync to Pedal in the editor. The editor pushes the active setlist to the pedal — the action will reboot the pedal and disconnect the editor while the device restarts. The setlist persists on the pedal after syncing.